Viper Bike |
 |
| TITLE |
+ |
- |
| FILE NAME |
+ |
- |
| DATE |
+ |
- |
| POSITION |
+ |
- |
|
|
06 ZX142997 viewsBought Bike brand new, "0" miles. Took some stock photos before tear down.
|
|
Gas tank cut out2768 viewsTop of tank was modified to accept the stock Viper flip top cap and grips fitted from Busa
|
|
Tailsection and metal hugger2796 viewsTail was fitted after signal delete and stock tailight delete. Hugger blank lies on the floor
|
|
Dry fit 360 kit3427 views360 Blank wheel and onr off hub were fitted. Tail section was checked for clearance
|
|
Plate bracket and tailight2600 viewsPlate bracket was fitted and modified, stock 3rd brake light from Viper car was fitted and checked
|
|
Front signal delete2791 viewsFront signals were removed. The stock running lights above the high beam were converted to turn signal duty.
|
|
Gas tank mod2948 viewsStocker was removed and a insert was installed that would hold the Matt Hotch Hot Match pop-up custom cap. The stock Viper flip top cap bolts over the hot match dealio to give a solid look like the car and still have a functioning cool cap underneath.
|
|
Small Parts2824 viewsParts accounted for before going to chrome
|
|
Engine prep3039 viewsEngine stand was fabricated for paint and then motor was masked off.
|
|
Chassis2741 viewsTotal strip down to bare frame
|
|
Viper 3rd light3027 viewsStock light from car. We removed the lens, cut it off, nad the LED board was removed and replaced with a custom LED board with built in turn signals and stop light function.
|
|
Rear Hugger3026 viewsStarted with a 180 degree fender blank. Welded horizontal mount and vertical support, shark fin, then smooth entire part. There is 7 hours in this fender to this point.
|
|
|
|
