SHORTY CUSTOM POLISHED VECP225 2.25-2.45 Inches

• This is an option when our Shorty application chart does not have a bolt-on fitment for your bike or situation.
• Right side exit Shorty polished muffler 12 inches long, 3 inches outer diameter, with a very slight angle pitched out (aprox. 4 degrees).
• Measure the outer diameter to the .001 of the tubing you will be clamping the VooDoo Exhaust muffler OVER. Use digital calipers to measure.
• Minimum sizing of 2.25 inches inner diameter.
• Maximum sizing of 2.45 inches inner diameter.
• Do not use a measuring tape or ruler, they are not accurate enough.
• Example: GSX-1300R Hayabusa has an aftermarket full exhaust and you want a VooDoo Shorty Muffler.
• Remove the muffler and mid-pipe, measure the outer diameter of the outlet off the 4 into 1 collector where the muffler will bolt on.
• Make a mock up and check for clearance then place your order indicating the outer diameter specs in the notes section and include what exhaust is on your bike now, what make/model of bike.
• Your new VooDoo Shorty muffler is supplied with a clamp and will be manufactured to mount OVER your measurement given.
• NOTE: This part is non-returnable and non-refundable once sized to customer specs. Installer is responsible for fitment, clearances, and any support brackets if needed.
• Power Commander may be required for proper fuel management.

Call if you have any questions and we will walk you thru it
Office: 1-(440) 653-5333